Deploying a vCFA in Hyper-V server 2008 R2.

This guide walks you through deploying the Hyper-V version of the vCFA.

The deployment process will consist of three phases:

  1. Choosing storage locations and importing vCFA VM
  2. Configuring imported vCFA VM and booting it up
  3. Initial setup of the vCFA

What you need:

To prepare for Step 1, consider the following recommendations for a Hyper-V server that will host the vCFA VM:

  • At least 2 CPU cores and 8GB of RAM available (not already used by other VMs or the host system)
  • 180GB of storage with low latency (preferably an SSD attached locally to the host machine) for the catalog volume
  • 2TB (or more) of high throughput storage to house the storage volume

Step 1. Choosing storage locations and importing the vCFA VM

Before going any further, decide where you are going to store the VM and virtual disk (VHD) files.

For optimal performance, there are a number of factors to consider when deciding where to locate the VM and virtual disk files:

  • At a minimum, the files should be stored separately from other VM files to avoid disk contention and other performance degrading issues.
    • If you have an SSD available on the server, this would be an ideal location for the catalog volume since it will see a very high level of traffic. The catalog volume holds, among other things, the database that is used by the system for bookkeeping, tracking, etc and performance benefits from having low latency to this volume.

Select a location for the VM files

Decide where you want to store the VM files and create a folder there. The storage device for these files does not need to be very large. But, as mentioned before, try to locate them apart from any other VMs on the server.

Select a location for the catalog virtual disk (VHD) file

Decide where you want to store the catalog virtual disk (VHD) file and create a folder there named **vCFA-Catalog** (you can use a different name, but please take note of it if you do). Important: this disk should reside on the highest performing storage hardware you have. If you have an SSD, put it there, otherwise choose a low-latency RAID or similar storage device. If not using an SSD, try to use a separate physical storage device from your other virtual machine files.

Select a location for the boot and storage virtual disk (VHD) files

Decide where you want to store the boot and storage virtual disk (VHD) files and create a folder there named -**vCFA-Data** (you can use a different name, but please take note of it if you do). Remember, select a location that is (preferably) on a separate physical device from all your other VM disk files. Ideally this device would be a high throughput RAID, or similar. If you do not have an SSD, try to put these disk files on a separate device from where you put the catalog disk files.

Getting and unpacking the ZIP archive Download the vCFA ZIP file, and unzip this file into the **vCFA-Data** directory we created above. Do not move the catalog volume yet, or import will fail. We will move the catalog volume after the import.

Importing the vCFA VM

  1. Open the Hyper-V Manager and, from the **Action** menu, choose **Import Virtual Machine**. Note: if you have a VM selected, this option will not appear in the menu. Make sure nothing is selected if you do not see the import item in the menu.
  2. Click **Next**, taking you to the **Choose Import Type** page. Select **Copy the virtual machine** (this will ensure that the VM gets assigned a new UUID). Do not select **Duplicate all files so the same virtual machine can be imported again**, or VMware will copy all the VHDs into its default directory for virtual disks.
  3. Click Import. You should now see vCFA VM that has just been created. Now we need to modify this VMs configuration. First open the Windows Explorer, and move the catalog.vhd file from the vCFAData\Virtual Hard Disks directory to the **vCFA-Catalog** directory you created earlier.
  4. Now back in the Hyper-V Manager window, right-click the vCFA VM and click Settings.
  5. Under the SCSI controller select the catalog.vhd hard drive on the left. Click the browse button, and browse to the new location of the catalog.vhd file in the **vCFA-Catalog** directory you created earlier, and then click apply.
  6. Click on the Network Adapter. In the network drop down list, select the virtual network to connect your vCFA to. It is recommended that you set a static MAC address while you are here so that Hyper-V does not give it a different MAC in the future. If the MAC address changes the network settings will be lost. Select static and assign a MAC address that you know does not conflict with any other system on your network.
    1. If you add additional NICs to your vCFA be sure they are also setup with unique static MAC addresses.

FIrst Boot:

  1. Once the VM is configured, it is time to boot up for the first time. During this initial boot, the Virtual CFA will try to get an IP address via DHCP, and once it has finished booting it will display this address on its console.
  2. Go to the web interface at that IP in your web browser, and log in. The username is `admin`, and the default password is `rvxd2d2d`.
  3. Enter the license key (delivered via email), or your Dashboard credentials to log in and authorize the CFA.
  4. At the **Configure Storage** screen, there are 3 lists of disks. On the left is a list of available drive that have not been assigned, and on the right is a list of storage disks, and catalog disks. To assign a disk to one of these categories, checked the box next to the disk, and then click the right arrow ( > > ) next to the list you want to assign that disk to. Disks assigned to storage are used to store backup data, and disks assigned to the catalog volume will be used for the databases to manage backup jobs and deduplicated data.
  5. A summary screen is shown. Review you selected storage layout and then click finish.
  6. After you click finish, the vCFA will reboot. During this boot the disks are formatted, and the deduplicated storage is created. This can take a long time, but please do not shutdown or reboot the CFA until this has finished. Once the CFA has finished booting, log in to the web interface again. You will be shown the end user license agreement. Read the agreement and click **I Agree**.
  7. At the quick start wizard, you will setup initial system settings. Go through the steps in the wizard to set your timezone and time, set the password, set the CFAs hostname and IP addresses, etc. At the end of this quickstart, we will do a final reboot of the CFA, and it will then be ready to use.