›  Backup & Disaster Recovery  ›  Appliance models  ›  1780

    Backup & Disaster Recovery appliance 1780

    • Summary:Specifications and features of the Backup & Disaster Recovery appliance — model 1780.
    • 1 min read

    Available for purchase. Supported in terms of both hardware and software.

    Appliance view 1 Appliance view 2

       
    End-of-life  
    End of sales TBD
    Hardware warranty 1 Standard – 3 years from the date of purchase.
    Extended – 5 years from the date of purchase.
    End of software support 2 TBD
    Processor  
    Model Intel Xeon Silver 4210R
    Base frequency 2.4 GHz
    Number of cores 10
    Upgrade N/A
    Memory  
    Size 128 GB
    Type DDR4, ECC, REG
    Frequency 2933 MHz
    Upgrade Up to 256 GB
    Storage  
    Catalog drive capacity 240 GB, SSD
    Data drive capacity (raw) 30.72 TB, SSD
    RAID level 10
    RAID capacity (total) 15.36 TB
    RAID capacity (usable) 14.3 TB
    Hot-swap drive bays 4
    Ports  
    Ethernet 2 × 1 GbE
    IPMI Yes
    Cooling  
    Processor Passive heat sink
    Chassis 4 fans @ 22,500 rpm each
    Power supply  
    Output 350 W
    Voltage 100–240 V
    Frequency 50–60 Hz
    Physical specs  
    Chassis 1U
    Width 17.2 in.
    Depth 19.85 in.
    Height 1.7 in.
    Weight 31 lb. (case)

    1. Hardware warranty applies as follows:

      • If warranty is active, we replace hardware parts at our expense.

      • If warranty has ended, but hardware parts are still commercially available, we may replace them at your expense (including shipping).

      • If warranty has ended and hardware parts are not commercially available, we recommend hardware refresh.

      ↩

    2. Unless there is an active, previously signed support contract. ↩